Custom Fibre Discs from HONXIN
Abrasive Conversion: Dimensions, Hole Patterns and Grit
Assess fibre disc specifications for your machine, backing pad, fixing system and processing conditions.
Different grinding setups require different outside diameters, centre holes, chip-clearance holes, ventilation and attachment methods. Provide a machine specification, sample or drawing so HONXIN can assess a suitable custom conversion.
Do Standard Fibre Discs Fit Your Process?
Incompatible Holes
Different machines, pads or fixtures can require different fixing patterns. Confirm fit before operation.
Unstable Contact
An unsuitable diameter, centre hole or disc construction can cause uneven contact, movement or vibration.
Poor Chip Clearance
A hole pattern that does not suit the process may contribute to loading, heat or reduced cutting efficiency.
Uncertain Supply
Special specifications sourced only through occasional small orders can create lead-time and batch-consistency challenges.
Custom Fibre Disc Specifications
Assess the Specification for Your Machine
Disc Diameter
Check disc and backing-pad dimensions
to confirm the required outside diameter.
Centre Hole
Assess the centre-hole diameter
for the machine interface.
Hole Patterns
Review chip clearance, ventilation and fixing
to assess a suitable hole pattern.
Abrasive and Grit
Use material and process conditions
to select candidate abrasives and grits.
Machine Compatibility
Provide the machine and application
for a compatibility assessment.
Supply and Packaging
Discuss packaging requirements
and recurring supply arrangements.
Metal Grinding, Weld Dressing and Surface Preparation
Potential Processes
- Metal grinding and deburring
- Weld dressing and weld-bead removal
- Surface cleaning and rust removal
- Coating and oxide removal
- Flat and contoured surface grinding
- General metalworking applications
Materials to Assess
- Carbon steel / Stainless steel
- Aluminium alloys / Copper alloys
- Cast iron
- Galvanised steel sheet
- Titanium alloys
- Other metals
Standard and Custom Products for Different Requirements
If a manufacturer grade is already specified, consider the standard product. For special hole patterns, non-standard dimensions, machine fit or recurring volume supply, ask HONXIN to assess custom fibre disc conversion.
| Comparison | VSM AF799 Standard | HONXIN Custom Fibre Discs |
|---|---|---|
| Product Type | Standard Supply Manufacturer-standard product | Custom Conversion Conversion assessed to customer requirements |
| Suitable Enquiries | Customers specifying a VSM grade and performance requirements | Customers needing special dimensions, hole patterns or recurring supply |
| Selection Focus | ACTIROX shaped ceramic grain and high stock removal | Machine fit, hole patterns and specification flexibility |
| Specification Options | According to manufacturer specifications | Assessed from samples, drawings or machine requirements |
| Enquiry Details | Grade, dimensions, grit and quantity | Machine, hole pattern, dimensions, abrasive, grit, sample and quantity |
| Typical Requirements | Standard products for high stock removal | Non-standard specifications, special machines and recurring production consumables |
From Sample Assessment to Volume Supply
Requirements review, specification assessment and sample evaluation help establish a suitable fibre disc specification for the intended equipment and supply needs.
Share Requirements
Provide the material, machine, current disc dimensions, hole pattern, grit, application and quantity.
Confirm Specifications
HONXIN assesses possible specifications using the fixing system, process conditions and sample or drawing.
Assess Sampling
Special dimensions, holes or non-standard constructions may require sample or trial-production assessment.
Supply
Once specifications are agreed, discuss supply arrangements by purchasing cycle, consumption and packaging requirements.
FAQ
Product Questions
Find guidance on fibre disc selection and custom conversion. Contact HONXIN with your machine and application requirements.
What is a fibre disc?
A fibre disc is a coated abrasive disc made with a fibre backing and abrasive grain. It is commonly used for metal grinding, weld dressing, deburring and surface preparation, subject to the product and process conditions.
Can HONXIN assess different hole patterns for different machines?
Yes, subject to assessment. Angle grinders, pneumatic tools, automated machines and special fixtures may require different centre, fixing, chip-clearance or ventilation holes. Provide a sample, drawing or machine photo to confirm feasibility.
Can non-standard dimensions be made?
Specifications can be assessed against your requirements. Discuss the outside diameter, centre hole, hole pattern and grit with details of the machine, backing pad and operating conditions.
Is a sample always required for a quotation?
Not always. Samples, drawings or photos are helpful for special holes, sizes or machines. Without a sample, start with the machine model, dimensional requirements, hole description and application.
Should I choose a VSM standard product or a HONXIN custom disc?
If a manufacturer grade is already specified, check the VSM standard product. For special hole patterns, non-standard dimensions, machine fit or recurring volume requirements, ask HONXIN to assess a custom fibre disc solution.
Contact HONXIN
Discuss Your Metal Finishing Requirements
Provide the material, machine model, disc dimensions and hole requirements. HONXIN can assess material selection and fibre disc conversion against the actual application.