RIKEN Abrasive Belts

Select the Grade for Your Grinding and Finishing Process

  • Compare RIKEN abrasive belt grades by grain, backing and processing target.
  • Confirm machine compatibility and assess cutting action, service life and surface quality through trial grinding.
Ask About RIKEN Belts
From Japan

RIKEN Abrasive Belts from Japan

Compare the grades below for the intended application. Contact HONXIN to confirm dimensions, grit, joint and supply specifications.

環帶

S79A Abrasive Belts

Ceramic Grain for Demanding Grinding Applications
  • RICRLE is the name used for products with RIKEN CORUNDUM ceramic abrasive grain.
  • The ceramic grain and product treatment help limit grinding heat.
  • Self-sharpening grain supports a sharp cutting action.
  • Blade deburring, scratch removal on stainless steel and weld-bead removal.
  • Dry or wet grinding, subject to the product and machine instructions.
  • Abrasive: Ceramic
  • Backing: Cloth
  • Product forms: Belts, rolls and discs
Grade Grit
S79A #40 #60 #80 #100 #120
● ● ● ● ●
【CK77】砂布

CK77 Abrasive Belts

Cork-Based Abrasives for Metal Finishing
  • Cork provides cushioning during finishing.
  • Abrasive-coated cork supports a fine, consistent polishing surface.
  • Finishing of metals, including stainless steel, carbon steel, aluminium alloys and copper.
  • The current manufacturer catalogue permits dry and wet grinding. Confirm the product and process conditions before use.
  • Abrasive: Silicon carbide and cork
  • Backing: Cloth (Xwt)
  • Product forms: Belts and rolls
Grade Grit
CK77 #240* #320 #400 #600
● ● ● ●

*The Chinese source lists #240. Its availability requires confirmation; the current manufacturer catalogue lists #320, #400 and #600.

FAQ

Frequently Asked Questions

HONXIN helps customers compare abrasive specifications and processing conditions.

Do not substitute by brand or dimensions alone. The listed grades use different abrasive grains and constructions. Confirm the workpiece, grinding target and machine conditions.

Specify the required stock removal, current surface marks and final appearance, then compare individual grades. High stock removal and final finishing require different selection criteria.

Provide width by circumference with units, plus the current grade, grit, joint and machine details so conversion specifications can be checked.

Check the manufacturer instructions for each grade. The same brand or a cloth backing does not establish suitability. Coolant use also requires the machine and workpiece conditions to be checked.

Under equivalent process conditions, compare processing time, belt-change frequency, surface quality and the condition of the used abrasive.

Provide the full grade designation, grit, belt dimensions, machine, application and estimated consumption so HONXIN can assess raw-material availability and conversion feasibility.

Discuss Your RIKEN Belt Requirements

Share your grade, grit, dimensions and application with HONXIN.

Contact HONXIN