Product Information
XF733
Advantages
  • Higher stock removal and longer service life, depending on the application.
  • Reduced chip adhesion helps extend service life and reduce abrasive changes.
  • Grease-free grinding helps keep the workplace clean.
  • Lower abrasive consumption can reduce waste-management costs.
Applications
  • Developed for aluminium and non-ferrous metals such as bronze and copper.
  • Suitable for weld preparation, weld levelling, deburring and gate removal, subject to the specific grade and operating conditions.
Features
  • VSM CERAMICS abrasive grain technology.
  • An additional grinding-active layer helps reduce chip adhesion.
  • Vulcanised fibre backing for fibre discs.
  • Sturdy polyester backing for belt grades; suitability for wet grinding must be checked by grade.
  • Developed for aluminium and non-ferrous metal processing.

Reduced Chip Adhesion

The additional anti-adhesion layer helps maintain grinding performance by reducing chip buildup. Actual performance depends on the workpiece, grade and process conditions.

Processing Non-Ferrous Metals

Non-ferrous metal chips can accumulate around abrasive grain tips and reduce cutting performance. The ALU-X grinding-active layer helps reduce chip adhesion and clogging; it is not a guarantee of zero clogging.

有色金屬加工
Product Grades

Current and Former Names: Product Grade Guide

STEARATE and STEARATE PLUS are former names for VSM ALU-X. The grades below are XF733 fibre discs and XK733X belts. Dimensions, grit sizes and availability must be confirmed for each grade.

XF733

XF733 is a fibre disc with ceramic abrasive grain and the ALU-X grinding-active layer, developed for aluminium and non-ferrous metal grinding. ALU-X helps reduce chip adhesion and improve chip clearance.

Confirm dimensions and grit size against the angle grinder, backing pad and workpiece requirements. Available specifications must be checked separately.

XK733X

XK733X is a ceramic abrasive belt material with a polyester backing and the ALU-X grinding-active layer, developed for aluminium and non-ferrous metal processing.

Provide the belt width and circumference, machine and operation so HONXIN can confirm the conversion format, grit sizes and available specifications. See VSM ALU-X information.

FAQ

Frequently Asked Questions

Product selection and trial-grinding guidance for STEARATE PLUS, now known as VSM ALU-X.

Suitability depends on the complete product grade, workpiece and operation, not the coating name alone. Describe the required stock removal, current surface and subsequent processing requirements.

No. Chip adhesion can still be affected by the workpiece, grit size, contact conditions and chip-clearance method. Performance must be evaluated under actual operating conditions.

Use the same workpiece, machine and processing target to compare abrasive consumption, processing time, clogging and surface quality. Do not judge only by the initial cutting feel.

This is not recommended. Also compare backing material, product form and grade-specific application conditions, then confirm compatibility with the existing equipment.

Provide the belt width and circumference, full product grade, grit size, equipment and joint requirements. For other product forms, provide the relevant dimensions and attachment method.

Provide the material, equipment and current abrasive, together with photographs of clogging or surface problems. Explain which performance measures you want to improve so a suitable option can be evaluated.

Talk to HONXIN

Discuss your non-ferrous metal grinding requirements